Agibot D1 MaxPro

An industrial quadruped with a 50 kg rated payload, IP67 protection and SDK support for x86 and ARM.

$65,999USD · Per robot

Product render 1 / 11

Rated payload: 50 kg on flat terrain
Compute: 117 TOPS GPU / ARM CPU
Protection: IP67

Quantity

Availability and delivery are confirmed before payment.

Delivery

Destination country

Ships domestically within the U.S.

Technical specifications

A separate model from D1 Max, built for heavier payloads. The optional charging dock and software speed limit should be considered when planning a deployment.

Motion & performance

Degrees of freedom: 12 total / 3 per leg
Rated payload: 50 kg on flat terrain
Maximum operating speed: 2 m/s (software-limited; 3 m/s laboratory maximum)
Continuous walking speed: 0–1.2 m/s
Continuous stair height: 30 cm
Maximum slope: 45°
Joint torque: 300 N·m maximum / 180 N·m software limit

Size & construction

Product model: ZYCXD150M
Standing dimensions: 1270 × 520 × 730 mm
Prone dimensions: 1360 × 570 × 300 mm
Weight with battery: 68 ± 1 kg

Power & endurance

Battery: 2160 Wh / 45 ± 1 Ah / 48 ± 2 V
Charging time: About 4.5 hours, 10–90%
Battery runtime: 5.5 ± 0.5 h no load / 2 h with 50 kg load
Operating range: 21 ± 1 km no load / 11 ± 1 km full load
Power outputs: 12 V / 24 V / 48 V; up to 720 W
Autonomous charging dock: Optional

Sensing & integration

Compute: 117 TOPS GPU / ARM CPU
LiDAR: Front 96-line / 360° × 90° / 120 m detection range
Cameras: Front + rear 2 MP wide-angle / 30 fps
Secondary development: TCP and ROS SDKs for x86 and ARM
Expansion interfaces: USB 3.0 × 2 / 100 Mbps Ethernet × 3 / serial

Equipment & operating conditions

Protection: IP67
Operating temperature: −20 to 55 °C

From the August 25, 2026 manual, specification tables and their footnotes. Speed is software-limited to 2 m/s. Payload assumes flat terrain; actual performance varies with environment and use.

Manufacturer reference